3 Simple Application Tips To Prevent Your Hardwood Finish From Peeling

Posted on: 20 June 2016

After installing your hardwood floors, it is important to seal off the final work with a heavy duty finish. A solid finish will help to protect your hardwood floor from fading, scratching and other potential damage. While finding the right finish that is compatible with your hardwood floor is important, the application process is just as important. A finish that is poorly applied can result in peeling. The peeling gives the finish a cloudy color that is easily noticeable. If this happens, then you will need to start the process all over again. Fortunately, there are a few application tips you should consider to ensure that the finish goes on smoothly.

Make Sure to Sand Your Floors

Sanding is often used on hardwood floors in order to bring out the natural beauty in the floors. However, the sanding process also creates a smooth surface that is ideal for applying finishes and sealants. If you skip sanding your hardwood floors, then the finish is more vulnerable to developing cracks and chips before the process is even over. Therefore, you can use a buffer or perform the sanding by hand. It is important to make sure that you sand all areas of your floor evenly. Holding the buffer or sander in one area too long will result in inconsistencies.

Remove Contaminants from the Floors Before Application

How well the finish adheres to your floors relies heavily on a clean foundation. Applying a finish to a surface that is full of oil and other debris will cause the finish to peel and crack. Therefore, use oil-free soap and water to clean the hardwood floors before application. Avoid drenching the floors with water; simply dip a clean cloth in soapy water and wring it dry. Use the cloth to wipe down the floors a few times and allow the floors to dry thoroughly.

Remove Excess Finish After Each Application

Applying your finish to your hardwood floors will require several passes. After each coat, you need to use a clean cloth to wipe away any excess finish. A finish that is not thoroughly removed before each new application will result in a buildup and will eventually peel. In addition, it is important to wait for each coat to dry before you apply another coat.

A finish that is properly applied can help to bring together the entire look of your hardwood floors. Therefore, use these tips to avoid any issues with peeling. For more tips, contact a company like Dream Floors.